Every Full Arch Prosthesis Classification. One Lab.
Every Full Arch Prosthesis Classification.
One Lab.
Fixed screw-retained bridges and implant-retained digital overdentures, across all Misch classifications.
Accepts complete pre-surgical cases and standalone restorations from photogrammetry or scan body records.
All-on-X and custom full-arch configurations
CASE ENTRY POINTS
Starting Fresh or Finishing a Case
DTS supports full-arch cases at both entry points.
PRE-SURGICAL WORKFLOW
Starting from CBCT and pre-surgical planning.
-
CBCT and IOS-based treatment planning
-
Stackable surgical guide for edentulous arch
-
Immediate full-arch printed provisional
-
Final arch prosthesis designed and fabricated within the same workflow
For full workflow details on treatment planning and guided surgery,
see the Treatment Planning & Guided Surgery page.
IMPLANTS ALREADY PLACED
Final arch fabrication from existing implant records.
-
No prior DTS planning history required
-
Submit photogrammetry (preferred) or full-arch IOS scan with scan bodies
-
DTS designs and fabricates the final arch prosthesis from your records
-
Accepts cases from any surgical origin
DIRECT CASE COMMUNICATION
Questions about implant positioning, prosthetic space, or restorative design can be discussed before fabrication begins.
Communication stays within the same workflow throughout the case.
Every case at DTS follows a single workflow from planning to final restoration.
No internal handoffs. No case transfers between departments.
CASE ENTRY POINTS
DTS supports full-arch cases
at both entry points.
Starting Fresh
or
Finishing a Case
PRE-SURGICAL WORKFLOW
-
CBCT and IOS-based treatment planning
-
Stackable surgical guide for edentulous arch
-
Immediate full-arch printed provisional
-
Final arch prosthesis designed and fabricated within the same workflow
For full workflow details on treatment planning and
guided surgery, see the Treatment Planning & Guided Surgery page.
Starting from CBCT and pre-surgical planning.
IMPLANTS ALREADY PLACED
Final arch fabrication from
-
No prior DTS planning history required
-
Submit photogrammetry (preferred) or full-arch IOS scan with scan bodies
-
DTS designs and fabricates the final arch prosthesis from your records
-
Accepts cases from any surgical origin
DIRECT CASE COMMUNICATION
Questions about implant positioning, prosthetic space, or restorative design can be discussed before fabrication begins.
Communication stays within the same workflow throughout the case.
Every case at DTS follows a single workflow from planning to final restoration.
No internal handoffs.
No case transfers between departments.
Implant-Retained Digital Overdenture
A removable full-arch prosthesis retained by locator attachments on implants or multi-unit abutments. Digitally designed and printed to the implant positions with integrated locator housings. Patient-removable for home hygiene.
Printed FDA-cleared resin. Compatible with all attachment systems.
For patients who prefer a removable solution with implant stability and retention.
Zirconia over
Titanium Bar
(FP1 / FP3)
Zirconia prosthesis reinforced with a milled titanium substructure. The bar connects to the implant interfaces. The zirconia delivers monolithic esthetics with the load distribution and fracture resistance of a metal substructure.
Compatible with multi-unit abutment platforms. Photogrammetry strongly recommended.
For full-arch cases where long-span strength and passive fit are the primary requirements.
FP3 - Full Arch with Gingival Component
Replaces teeth and missing gingival tissue with a single screw-retained prosthesis.
Gingival component in zirconia with optional pink staining.
The standard format for All-on-X protocols. Accommodates angled multi-unit abutments.
Available in monolithic or layered zirconia with gingival staining.
For patients with ridge resorption, bone reduction cases, or where FP1 is not anatomically indicated.
FP1 - Full Arch Crown Anatomy Only
No pink gingival material. Prosthetic teeth emerge from natural tissue, replicating individual crown anatomy.
Requires adequate bone volume, scalloped tissue architecture, and prosthetically driven implant positioning.
Available in monolithic or layered zirconia.
For patients with adequate bone and tissue volume who require the most natural esthetic result.
WHAT WE FABRICATE
Four Full-Arch Prosthesis Designs
DTS fabricates both fixed and implant-retained removable full-arch prostheses.
The appropriate design is determined by available bone volume, restorative space, soft tissue architecture, occlusal load, and the patient's functional requirements.
The choice is made at planning and confirmed before fabrication begins.
HOW IT WORKS
Four Steps. Two Entry Points.
One Workflow.
Delivery and Post-Delivery Support
4
Fabrication
Phase 1. Phase 2
3
Prosthetic Design Review and Approval
2
Submit
Records
1
Every case ships with complete documentation and direct access for post-delivery questions.
Included with every case: seating instructions, access hole location map, and shade documentation.
Direct communication is available after delivery for questions on fit, occlusion, or seating.
Overdenture cases include housing orientation notes and retention insert specifications.
Post-delivery support included with every case. No support ticket required.
Every deliverable the case requires is fabricated within the same workflow.
Complete cases: stackable surgical guide and immediate full-arch provisional are fabricated simultaneously and shipped before your surgery date.
After osseointegration, updated post-op records initiate final arch fabrication. Standalone cases: final arch prosthesis fabricated directly from submitted records.
No surgical deliverables required.
Guide and provisional: 5 business days from approval.
Final arch prosthesis: 10 to 14 business days from record submission.
The prosthesis is designed to your case records and returned for review.
Complete cases: virtual treatment plan returned first, including implant positions, bone reduction design, and prosthetic contours.
All parameters are reviewed and approved in writing before fabrication begins.
Standalone cases: final arch designed to your as-placed implant positions, with a design preview shared for approval.
No fabrication begins without written approval.
Upload your case records via the DTS portal.
Complete cases: CBCT DICOM, full-arch IOS scan, existing denture or wax-up scan, clinical photos, and Rx with prosthetic type preference.
Standalone cases: photogrammetry file (preferred) or full-arch IOS with scan bodies fully seated and X-ray verified, opposing arch scan, bite registration, clinical photos, and shade information.
Both paths: include implant system, platform, and connection type.
Every submission reviewed before fabrication begins. No fabrication starts without written approval at every stage.
1
Submit
Records
Upload your case records via the DTS portal.
Complete cases: CBCT DICOM, full-arch IOS scan, existing denture or wax-up scan, clinical photos, and Rx with prosthetic type preference.
Standalone cases: photogrammetry file (preferred) or full-arch IOS with scan bodies fully seated and X-ray verified, opposing arch scan, bite registration, clinical photos, and shade information.
Both paths: include implant system, platform, and connection type.
Every submission reviewed before fabrication begins. No fabrication starts without written approval at every stage.
2
Prosthetic Design
Review and Approval
The prosthesis is designed to your case records and returned for review.
Complete cases: virtual treatment plan returned first, including implant positions, bone reduction design, and prosthetic contours.
All parameters are reviewed and approved in writing before fabrication begins.
Standalone cases: final arch designed to your as-placed implant positions, with a design preview shared for approval.
No fabrication begins without written approval.
3
Fabrication
Phase 1. Phase 2
Every deliverable the case requires is fabricated within the same workflow.
Complete cases: stackable surgical guide and immediate full-arch provisional are fabricated simultaneously and shipped before your surgery date.
After osseointegration, updated post-op records initiate final arch fabrication. Standalone cases: final arch prosthesis fabricated directly from submitted records.
No surgical deliverables required.
Guide and provisional: 5 business days from approval.
Final arch prosthesis: 10 to 14 business days from record submission.
4
Delivery and Post-Delivery Support
Every case ships with complete documentation and direct access for post-delivery questions.
Included with every case: seating instructions, access hole location map, and shade documentation.
Direct communication is available after delivery for questions on fit, occlusion, or seating.
Overdenture cases include housing orientation notes and retention insert specifications.
Post-delivery support included with every case. No support ticket required.
HOW IT WORKS
Four Steps.
Two Entry Points.
One Workflow.
WHAT TO PREPARE & WHAT TO EXPECT
Technical Specifications & Requirements
Materials:
-
Full-arch fixed bridges: monolithic or layered zirconia
-
Zirconia over Titanium Bar: Milled grade IV titanium substructure, zirconia outer shell
-
Provisionals: printed FDA-cleared interim resin.
Optional 3-month reprint available to incorporate tissue changes and confirm esthetics before final fabrication. -
Overdentures: printed FDA-cleared resin with integrated housings
-
Protective Occlusal Splint: printed FDA-cleared High-Impact Biocompatible Resin:
Turnaround Times:
-
Guide + provisional:
7 business days from treatment plan written approval -
Final restoration:
10 to14 business days from post-op record submission
Start with a Conversation
Full-arch cases carry significant prosthetic investment for your patient. Book a 30-minute case review before submitting records.
Fit, protocol, and turnaround are confirmed before fabrication begins.
No obligation.
30-minute clinical case review. No commitment required.
Every submission is reviewed by a CDT within 24 hours.
US-fabricated · CDT-reviewed · No offshore handoffs
What you receive:
At Guide + Provisional Delivery (Complete Cases):
-
Planning video: implant position, emergence design, and smile parameters
-
Surgical protocol: Comprehensive drilling sequence and surgical instructions included with every guide
-
Surgical guide: Stackable / Bone / Tissue - supported
with OEM sleeves -
Immediate: Full-Arch provisional, printed FDA-cleared interim resin, conversion style for relining, designed to planned implant positions (Or Immediate Digital Denture)
-
Master model: for verification (upon request)
-
Revisions: unlimited until written approval
At Final Restoration:
-
Final: screw-retained arch prosthesis in the specified design and material OR, Digital Overdenture
-
Optional: Protective Occlusal Splint for Long-term Implant & Bone Preservation
-
Direct post-delivery communication: included
What we need from you:
For Complete Cases:
-
CBCT scan (DICOM): full jaw FOV, Scan Appliance with radiographic guide (If denture/partial exist)
-
IOS (STL): Soft tissue, bite registration (with denture/partial)
-
Post Surgery: Photogrammetry file or full-arch IOS with SB
-
Clinical photos: frontal, lateral, occlusal, and smile views
-
Implant system: Brand, system and guided kit info
-
Provisional type: Fixed (Conversion) of Immediate Denture
-
Esthetics: objectives and shade preference
-
Prosthetic preference : FP1/ FP2 / Overdenture
For Standalone Cases:
-
IOS (STL): full arch scan with scan bodies fully seated and X-ray verified prior to submission
-
Photogrammetry file: strongly recommended for full-arch and multi-unit cases requiring maximum positional accuracy
-
Provisional scan: current contour scan if existing denture / Pre-Op records
-
Clinical Photos: full face, retracted, occlusal, with existing provisional for reference.
-
Desired prosthesis type: FP1, FP3, Zirconia over Titanium Bar, or Overdenture
-
Esthetics: Shade and morphology preferences
Have a Case Ready?
Submit your scans, photos and implant details
through our portal to get started
Want to Discuss First?
Schedule a complimentary consultation to discuss materials and design approach for your case
Exploring other services?